Awning maintenance and using range
Author: DUOCAI Time:9/19/2015 11:30:32 AM
Awning of maintenance:
1, awning will only be put clean and dry. When the wet awning had to pack up, please remember that I have the chance should be fully expanded and dry it.
2, awning, cleaning should be fully open it when it is dry and clean. The right steps should be used when cleaning maintenance, do not depend on the awning, also do not force pressure on it. Awning with automatic controller before any operation, please be sure to cut off the power and close the automatic device.
Whether you need 3, awning cleaning, largely depends on the environment (traffic density, air pollution, industrial pollution, etc.).
When cleaning requirements are as follows:
1, in the awning dry with a soft brush regularly to remove dust.
2, branches, leaves, and similar objects should be clear in time.
The selection of awning:
Awning is applicable to low-level, multi-storey building doors and Windows used to shade. Should not be used in high-rise building external blinds. For equipped with automatic control system, general requirements must be installed risk control, rain sensor, optical could be selected according to specific situation. A manual drive mode of external blinds generally does not apply to unmanned and often places. Shading material, thickness, size and form of material, fixtures and specifications, in the form of the power of the motor () when the use of electric, use place is correlated relationship between the size of the wind pressure, etc, should be based on specific engineering cases, the professional manufacturer for the relevant technical data, after comprehensive consideration to choose.
Shading systems are connected to the building main body practice, lightning protection measures relating to the safety problems, by engineering designer must according to the actual engineering situation, determined and is responsible for the research together with the professional manufacturers.
Who choose to contain the sun-shading system of shutter boxes, shutter box placed should be considered the influence of different location on the wall body energy saving.