The correct maintenance of the shade, you do it?
Author： DUOCAI Time：9/18/2015 6:07:11 PM
1. the sun is wet, how to do?
It is suggested that the opportunity should be put in full expansion and dry. If wet by the rain, the awning only cleaned and dried to hide. When the sun is wet but have to put away. Should be fine after the awning is opened, and then close the mechanism of the tarpaulin naturally dried.
2. how to remove the stains on the hood?
It should be completely opened and done at work. Cleaning and maintenance should be used when the correct method, cleaning the shade. Don't lean on the awning, and don't be too hard on the top. With the automatic controller of the shade in front of any operation, please be sure to cut off the power supply, close the control device.
3. when the cleaning of the sun?
It is largely determined by the environment (traffic density, whether or not the sun will need to be cleaned. Air pollution, industrial pollution, etc.) need to be cleaned as follows:
(1) when the sun is dry, a soft brush is used to remove the dust regularly.
(2) the tree, leaves and other similar objects shall be cleaned in time.
(3) if there is a small piece of dirt on the cloth. With a dip have general cleaning agent the soft brush, brush lightly, after the application of water washed several times until fabric without residual detergent, open to dry.
4. how to clean other parts?
Can not be used in acidic (such as hydrogen chloride) or abrasive materials (such as abrasive pad, for the upper part of the aluminum alloy consisting of high grade aluminum alloy. Sandpaper, emery paper, etc.) can damage the surface of pumice. Aluminum alloy frame cleaning should be treated with caution, usually with a soft cloth, cleaning agent. And note, in the high grade aluminum alloy cleaning agent, not contact the cloth.
